Horizon S3
      Back to home
      1. Help Center
      2. Body Cameras
      3. Horizon S3

      Connecting your camera to a Wi-Fi Network via WPS

      Guide to adding Wi-Fi to your Horizon body camera using your Wi-Fi router (if WPS is supported)

      If your Wi-Fi router supports WPS (Wi-Fi Protected Setup), you can quickly connect your Horizon body camera without needing to manually enter network details.

      1. Ensure your Horizon body camera is within close range of your Wi-Fi router to establish a strong connection 
      2. Locate and press the WPS button on your Wi-Fi router:
        • This button may be labelled "WPS" or display two curved arrows pointing in opposite directions 
        • Once pressed, the router will enter WPS pairing mode for around 1-2 minutes

           
      3. On the side of your camera, press the FN button multiple times until the camera's LCD screen displays "WPS Active". This means the camera is now searching for a WPS-enabled network to connect to. 

      4. The Wi-Fi symbol on the camera's LCD screen should turn white if the camera has successfully connect to your Wi-Fi network. Hardware-Horizon-WifiConnectedSymbol

      If you continue to have issues, you can also try configure your camera's network via Vault using the QR code configuration feature. Please refer to this help article for step-by-step instructions: Help Article